Car speakers are built of various materials that are prone to dust accumulation. The most vulnerable areas are speaker cones, the primary dust cap, and the outer rubber ring. When it comes to the portion of how to clean vehicle speaker holes, you must clean them with proper care, or they will be destroyed.
To clean the speaker, you will need a clean brush, a vacuum cleaner, and a can of compressed air. It is also advised not to use any cleaning chemicals.
If you want a great sound system in your car, you know how crucial it is to maintain it clean, in good shape, and sounding great.
There is a particular way to clean the speaker without damaging it and keep the sound quality as good as the first time you heard it. Grills are composed of metal, cloth, or plastic and are relatively simple to clean and maintain.
All you need is some handy equipment and the knowledge of how to clean automobile speaker holes. Let’s discuss how to clean car speaker holes in detail!
Things you need to clean your car speakers
You don’t need to acquire new equipment to clean your car’s speakers because you can use what you already have. While cleaning your automobile speakers, you will require various items. These are the items listed below.
- Tooth Picks
- Cloth made of microfiber
- Small, gentle cleaning brush
- The lint roller
- Spraying water
- Can of air spray
- Vacuum cleaner, small
- Rubber protector
Cleaning speakers will be a breeze if you have any items at home. On the other hand, if you don’t have a decent quality cloth or brush, you don’t have to spend a fortune on one.
How to clean your car speakers?
Removing Speaker Grills
Having a car music system in your car is undoubtedly entertaining, especially if the speakers are good. If your car speakers were professionally fitted, they should have speaker grills.
Car speaker grills are protective covers that go over the speaker drivers. Speaker drivers move up and down in response to music to produce sound.
Grills are used to cover these cones to protect them from objects and dust that could damage them. Grills are often composed of a variety of materials.
Delicate fabric, plastic, and metal are the most common grill materials. Metallic ones are often perforated in a dot, checkerboard, or even waffle pattern.
Screws are commonly used to secure some speaker covers. The screws may be found at the sides or corners of the grill frame. If this is the case, begin by removing all the screws that hold the grill to your car speaker.
Take caution, though, when removing the grill frame. To assist with removal, utilize flathead screwdrivers. Insert the screwdrivers into the screw’s foot. Move the grill frame upwards once it’s been inserted.
You may discover a rubber gasket beneath the grill frame; thus, be cautious when removing the grill frame to avoid injuring the gasket.
Cleaning car speaker grills
Now that you’ve gathered your supplies and removed the speaker cover/grill, you can begin cleaning it. Place the grill on a clean, dry, and flat surface. When cleaning a cloth grill, use a vacuum hose with a dust brush attached. Then suck dust from the fabric with it.
If you don’t own a brush for dust, you can vacuum the cloth grill equally by holding one of your fingers over the vacuum hose.
A dust brush or your finger over the hose may help prevent a powerful vacuum from tugging and bending a delicate automobile speaker cover.
Cleaning non-removable speaker grills
If your car speaker’s grill is not removable, you can clean it with a lint roller. Instead, you can use compressed air if you don’t have a lint roller. While cleaning non-removable grills, do not use a rag. Rags can push dirt deeper into your car speaker, making cleaning more difficult.
You can also utilize a vacuum to clean the grill, but make sure it has an upholstery attachment. It will get rid of dirt and dust. To prevent water from seeping into the speaker, use wet cleaning sparingly on non-removable grills.
Different methods to clean your car speakers
There is no need to worry if dirt fills your automobile speaker holes. There are numerous straightforward methods for removing the filth. You don’t need to disassemble the panels to clean them most of the time.
1. Tooth Picks
If there is only typical dirt and lint on the exterior of the grille, you can clean the automobile speaker holes with toothpicks that are commonly accessible at home. Use the sharp point to poke the speaker grille holes where dirt is stuck.
Clean the surface with a soft towel (ideally microfiber). If required, dampen the end of the toothpick to allow dirt to attach to it. You must be gentle when performing this task. If you use too much force, you may harm the grille.
You may discover that the grille’s holes are delicate or small. Special Q-tips are available at electronics stores if the toothpick is too thick for the job.
2. Compressed air
However, if a liquid has fallen on the speaker and entered it, the grille may become stuck on the interior surface. In this scenario, compressed air is particularly good at removing dirt. Direct the nozzle at the grille and click the button.
If you don’t have a can of compressed air, you can get some by using your bicycle pump. The point that goes into the tire valve should be aimed at the car speaker holes. Meanwhile, turn on the pump to blast air through the speaker grille. It will loosen the dirt, which you can then wash away with a cloth.
3. Alcohol Cleaner
Dirt can become adhered to the grille material of car speakers at times. In this situation, an alcohol-based cleaning solution (such as Super Clean) will be required to dissolve the filth. Then wipe it off or use one of the various cleaning procedures described here to remove the loosened dirt.
4. Vacuum Cleaner
The most straightforward technique to remove dirt from the grille is to use a vacuum cleaner. You will need a powerful vacuum cleaner for this. You can use your vacuum if you already have one for cleaning your automobile.
To remove the grime, you’ll also need an alcohol-based cleaning solution. It would be even better if your vacuum cleaner had a brush attachment. You can clean the speakers much more quickly if you utilize the brush attachment.
5. Powdered Spray
A dry-cleaning spray containing liquefied petroleum gas is ideal for this type of cleaning. Wear a face mask before applying the spray. Then, using the spray, evenly coat the grill. Allow the spray to dry completely.
When it dries, it will take on a whitish powder appearance. The spray absorbs dirt and oil. Dry-washing is ideal for cleaning speaker covers made of fabric since it does not cause the fabric to shrink.
In this manner, it will be preserved. If you can’t find a dry cleaner spray that includes LP Gas, consider choosing a spray that does.
6. Wet Cleaning
Consider wet cleaning if the grill has stubborn filth that won’t come off after vacuuming and dry cleaning. Place a mild cleaning detergent in warm water. Then, using a delicate cloth, apply the mixture.
Use a microfiber cloth if possible. Clean the grill gently and carefully. Remember to rinse it with a clean cloth and clean water. Allow the cloth to dry completely before reconnecting it to the speaker.
Conclusion
You can increase the life of your car speaker grills by cleaning them regularly. Cleaning them also reduces the possibility of dust getting deeper into the speaker. Furthermore, clean grills allow speakers to project sound more effectively.
When cleaning speaker grills, always use caution. If you don’t know how to detach them, consult the user manual for more information or seek professional assistance.